Water Based Primer
• Products • Water Based Primer
|
CEMENT PRIMER (Water Based)
We offer: We are offering an extensive spectrum of water based primer, water based epoxy primer and water based cement primer etc. We are one of the reckoned water based cement primer manufacturers in India.
“Walfit” – Cement Primer water based is an alkaline resistant primer having good adhesion to interior masonry surfaces for both new & old cement surfaces etc. It is specially formulated to give better alkaline resistance and filling property. Correct application of primer ensures better quality and durability of finish coat.
Method of Application: New masonry surfaces to dry out completely. For Old surfaces, make sure the surface is smooth and free from loose or powdery particles by scraping. Once the wall is dry and smooth, apply with a coat of Walfit – Water based Cement primer after thinning with water. Fill up minor cracks and defects with Walfit – Wall putty after the first coat. allow to dry completely, then rubbing with emery paper to smoothen the surface and apply final coat of primer on the putties surface. Normally the cement primer surface dry in 15 minutes & recoatable after 2 to 4 hours.
Coverage: The approximate covering capacity is 100 to 125 sq.ft per Lit. per coat. Its depends on surface condition / preparation and porosity of the surface.
Packing Size : 20 Lit & 1Lit. Plastic container.
We offer: We are offering an extensive spectrum of water based primer, water based epoxy primer and water based cement primer etc. We are one of the reckoned water based cement primer manufacturers in India.
“Walfit” – Cement Primer water based is an alkaline resistant primer having good adhesion to interior masonry surfaces for both new & old cement surfaces etc. It is specially formulated to give better alkaline resistance and filling property. Correct application of primer ensures better quality and durability of finish coat.
Method of Application: New masonry surfaces to dry out completely. For Old surfaces, make sure the surface is smooth and free from loose or powdery particles by scraping. Once the wall is dry and smooth, apply with a coat of Walfit – Water based Cement primer after thinning with water. Fill up minor cracks and defects with Walfit – Wall putty after the first coat. allow to dry completely, then rubbing with emery paper to smoothen the surface and apply final coat of primer on the putties surface. Normally the cement primer surface dry in 15 minutes & recoatable after 2 to 4 hours.
Coverage: The approximate covering capacity is 100 to 125 sq.ft per Lit. per coat. Its depends on surface condition / preparation and porosity of the surface.
Packing Size : 20 Lit & 1Lit. Plastic container.
Inquiry Form
Home | Company Profile | Products | Contact Us | Enquiry










